Csr Usb Spi Driver

Csr Usb Spi Driver

Run your CSR apps. Using the driver Choosing USB transport. Older BlueSuite defaults to use CSR SPI LPT programmer, to use csr-spi-ftdi You need to select USB SPI transport. Use -TRANS 'SPITRANS=USB SPIPORT=1' option for command line tools. Import misc/spi-set-usb-transport.reg to change the default. CH341A Pro Mini USB SPI Programmer Software & Drivers. CH341A is an USB interface chip that can emulate UART communication, standard parallel port interface, parallel communication and synchronous serial (I2C, SPI). CH341A is used by some cheap memory programmers.

●CSR USB-SPI Programmer driver is a USB-to-SPI converter. Which adopts true USB port. Its communicating speed is much higher than regular parallel port.

CSR USB-SPI Programmer is a USB-to-SPI converter. Which adopts true USB port. Its communicating speed is much higher than regular parallel port.

It not only supports CSR all Series of testing tools, including BlueFlash，PSTOOL，BlueTest3，BlueLab etc., but also supports testing software which downloaded from Bluelab, supporting breakpoint debugging/single-step debugging etc. With this programmer, users can also burn the software via tools like BlueFlash.


CSR USB-SPI Programmer driver is a USB-to-SPI converter. Which adopts true USB port. Which adopts true USB port. Its communicating speed is much higher than regular parallel port. CSQ200 driver: Cal-Comp Electronics: USB hub/controller: CSR BlueCore Bluetooth: CSR: USB hub/controller: CSR BlueCore Device: Cambridge Silicon Radio Limited: USB hub/controller: CSR BlueCore in DFU mode: CSR: USB hub/controller: CSR USB SPI converterCSR: USB hub/controller: CSR-Ralink BlueCore Device: Cambridge Silicon Radio Limited: USB hub.

Features:

●Supporting all CSR Chipset Series, for instance,

-BC2 Series(E. g. BC215159A etc.)

-BC3 Series(E. g. BC31A223,BC358239A etc.)

-BC4 Series(E. g. BC413159A06,BC417143B,BC419143A etc.)

-BC5 Series(E. g. BC57F687,BC57E687,BC57H687C etc.)

-BC6 Series(E. g. BC6110,BC6130,BC6145,CSR6030,BC6888 etc.)

-BC7 Series(E. g. BC7820,BC7830 etc.)

-BC8 Series(E. g. CSR8605, CSR8610, CSR8615, CSR8620, CSR8630, CSR8635, CSR8640, CSR8645, CSR8670, CSR8675 etc.)

-CSRA6 Series(E. g. CSRA64110,CSRA64210,CSRA64215 etc.)

-CSR10 Series(E. g. CSR1000,CSR1001,CSR1010,CSR1011,CSR1012,CSR1013 etc.)

-CSRB5 Series(E. g. CSRB5341,CSRB5342,CSRB5348 etc.)

●Supporting most Windows OS, including,

- Windows XP SP2 and above (32 & 64 bit)

- Windows Server 2003 (32 & 64 bit)

- Windows Server 2008 / 2008 R2 (32 & 64 bit)

- Windows Vista (32 & 64 bit)

- Windows 7 (32 & 64 bit)

- Windows 10 (32 & 64 bit)

●Small size（6.5cm*1.7cm）, easy to carry.

Csr Usb Spi Driver Download




Pin Port Definition:

Csr Usb Spi Driver


Application:

Csr Usb Spi Driver Download

●Firmware Programming

●CSR-Chip Module Testing



Spi


Driver Downloading:

●Please visit documentation download part in this page to get the driver.


Note:

●When this device is successfully installed, you will find it in the device manager list, see the reference image below.




Documentation
  • DownloadName：CSR USB-SPI Programmer Driver.zip
Module
Beacon
Solution
Support
DownloadVideoFeedback
About Us

Follow Us:

Products
Solution
Support
DownloadVideoFeedback
News
About Us
Sitemap© 2013-2025 feastcom.com 版权所有粤ICP备13025416号
FT220X – Full Speed USB to 4-Bit SPI / FT1248 Bridge

This USB2.0 Full Speed IC offers a compact bridge to 4-Bit SPI/FT1248 interfaces. The device is a FT1248 slave, capable of operating up to 500kBit/s, with low power consumption (8mA). The FT220X includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over an FT1248 interface

Key Hardware Features
  • FT1248 serial parallel interface in 1, 2 or 4 bit wide mode.
  • Similar to an SPI slave in 1 bit mode
  • Entire USB protocol handled on the chip. No USB specific firmware programming required.
  • Fully integrated 2048 byte MTP Memory for storing device descriptors and CBUS I/O configuration.
  • Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or FPGA.
  • Data transfer rates to 500 kByte/s
  • 512 byte receive buffer and 512 byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.
  • FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.
  • Configurable CBUS I/O pin.
  • Device supplied pre-programmed with unique USB serial number.
  • Supports bus powered, self powered and high-power bus powered USB configurations.
  • Integrated +3.3V level converter for USB I/O.
  • True 3.3V CMOS drive output and TTL input. (operates down to 1V8 with external pull-ups)
  • I/O levels from 1.8V to 3.3V. (5V tolerant inputs).
  • Configurable I/O pin output drive strength.
  • Battery Charger Detection. May be used by mobile devices to detect the presence of a charger on the USB port to enable higher current / faster charging of batteries.
  • Integrated power-on-reset circuit.
  • Internal 3.3V/1.8V LDO regulators
  • Low operating current of 8mA (typical) and USB suspend current of 125uA (typical) current.
  • Low USB bandwidth consumption.
  • UHCI/OHCI/EHCI host controller compatible.
  • USB 2.0 Full Speed compatible.
  • Extended operating temperature range: -40°C to 85°C
  • 16 Pin SSOP and QFN packages (both RoHS compliant).
Product information
Typical Applications
  • USB to SPI interface in 1-bit mode
  • USB Software and Hardware Encryption Dongles
  • Dedicated Charger Port (DCP) detection enabling battery charging at higher current for faster charge times.
Inventory from our Authorised Distributors
Related Products

UMFT220XB-01 - FT220XQ Based USB to 4-Bit SPI / FT1248 Bridge Breakout Module
UMFT220XA-01 - FT220XQ Based USB to 4-Bit SPI / FT1248 Bridge Development module

For more information on these modules click here